- Home
- Leak Detection
- Infrared Leak Detection
Infrared leak detection · San Diego County
Infrared Leak Detection in San Diego
Finding hidden wet areas in walls, ceilings and floors with infrared cameras — without removing tiles, cutting into walls or tearing up hardwood floors.
- ✓Family owned & operated
- ✓Licensed, bonded & insured
- ✓Free estimates
- ✓1-year warranty on our work
Request infrared leak detection
Tell us what plumbing problem you’re dealing with — the stain, damp area or suspected leak, and where it is.
Water moving right now? Call (858) 251-7070
The short answer
How does infrared leak detection work?
Infrared leak detection uses infrared thermal imaging cameras to trace the thermal footprint that water leaves in building materials, showing wet areas that are invisible to the eye. HomePro Plumbing & Drains uses it in homes and businesses across San Diego County to find the source of leaks and water intrusion non-destructively — so there is no need to cut into walls or ceilings, remove tiles or damage hardwood floors just to look.
Water can get into a building from many places — failing roofs, construction defects, siding and window problems, worn caulking, as well as plumbing leaks — and stay hidden inside walls and framing. By the time damage is visible, it may have been going on for a while.
Infrared is also used after a flood or water damage to check whether an area has fully dried. For how the cameras work, see thermal imaging leak detection.
Infrared helps find
- Hidden leaks in walls and ceilings
- Wet insulation and framing
- Water intrusion from roofs and windows
- Leaks under hardwood and tile
- Areas still wet after water damage
- Previous repairs that failed
When infrared helps
When to ask for an infrared inspection.
Stain with no known source
A ceiling or wall stain nobody can explain.
Leak behind finished surfaces
Tile, hardwood or cabinetry you do not want removed.
After a flood
Confirming everything is dry before closing up.
Repair did not hold
Checking whether a previous leak repair worked.
Water after rain
Intrusion through roofs, windows or siding.
Commercial buildings
Large areas where cutting to look is not practical.
Infrared finds where materials are wet; a plumber then confirms the source before any repair.

How an infrared inspection works
Scan, find, confirm, fix.
- 1
Scan the area
Walls, ceilings and floors are scanned with an infrared camera.
- 2
Find the wet areas
Temperature differences reveal where water is in the materials.
- 3
Trace the source
The pattern is followed back to the leak or entry point.
- 4
Explain and price
What we found and the full cost of the repair before work starts.
- 5
Re-check after repair
Infrared confirms the area is drying or dry.
In more detail
Why infrared saves time and damage.
Non-destructive by design
Infrared quickly and precisely identifies damp building components in homes and commercial buildings, without removing materials to look — which saves time and money compared with exploratory openings.
Checking previous repairs
After a flood or water damage, infrared shows whether an area has completely dried and whether a problem has been fixed. If it has not, the images help explain the problem to your contractor or insurance adjuster.
Routine checks
Hidden leaks can cause damage you do not know about. A routine check can find them before they grow.
Documentation
If you need images or documentation of the findings — for a contractor or an insurance claim — ask when you book so it can be planned. Questions? Call (858) 251-7070.
Why HomePro
Find it without tearing it up.
HomePro Plumbing & Drains is a family-owned San Diego plumbing company — licensed, bonded and insured. We find the leak before anything is opened up, explain what we found and how to fix it in the most efficient and least intrusive way, and give you the full cost of the repair before work starts — so there are no unexpected charges.
- ✓Family owned and operated
- ✓Licensed, bonded and insured
- ✓Non-invasive detection before anything is opened
- ✓Free estimates before work begins
- ✓One-year warranty on all of our work
- ✓Financing options available
HomePro at a glance
locally
our work
work begins
coverage
When to call a plumber
Active leak, or hidden damp?
Call right away if
- Water is dripping or pouring in
- A pipe has burst — close the main shut-off valve if it is safe
- Water is near electrical outlets
Call (858) 251-7070 — the phone is always faster than a form for anything active.
Book an infrared inspection if
- A stain has appeared with no obvious source
- You suspect a leak behind tile, cabinets or hardwood
- You want to confirm an area dried after water damage
- A previous repair may not have worked
Use the service request form or schedule service — estimates are free.
Google reviews
What customers say after a HomePro visit.










Reviews from HomePro’s Google Business Profile. See all reviews on Google
Related services
Related leak detection services.

Leaks
Thermal Imaging Leak Detection
Temperature differences reveal wet materials and hot-water line leaks.
Thermal imaging →
Leaks
Moisture Detection
Measuring how far water has spread into floors, walls and building materials.
Moisture detection →
Leaks
Mystery Leak Detection
For leaks nobody can trace — water showing up with no obvious source.
Mystery leaks →
Leaks
Water Intrusion Detection
Finding where outside water is getting into a building.
Water intrusion →
Leaks
Leak Detection
Hidden leaks under slabs, behind walls and in ceilings located before anything gets opened up.
Leak detection →
Leaks
Slab Leak Repair
Leaks in lines under the concrete slab located and repaired — spot repair, reroute or repipe.
Slab leak repair →Service area
Infrared leak detection across San Diego County.
HomePro Plumbing & Drains provides infrared leak detection for homes and businesses throughout San Diego County from its shop at 8910 Activity Rd Suite C, San Diego, CA 92126.
- University City →
- North Clairemont →
- Tierrasanta →
- Pacific Beach →
- Allied Gardens →
- La Mesa →
- Mission Beach →
- Chula Vista →
Not sure we cover you? Call (858) 251-7070.
Infrared questions
Infrared leak detection, answered.
Straight answers to what San Diego customers ask before booking.
What is infrared leak detection?
Using infrared thermal imaging cameras to find wet areas inside walls, ceilings and floors by the temperature differences water creates.
Do you need to cut into walls to find the leak?
No. Infrared finds wet areas without removing tiles, cutting walls or ceilings, or damaging floors. Any opening needed for the repair is kept as small as possible.
Can infrared find water intrusion from outside?
Yes. It helps trace water from roofs, windows, siding and failed caulking as well as plumbing leaks.
Can infrared confirm that an area has dried?
Yes. After a flood or water damage it shows whether an area has completely dried.
Can I get documentation for my insurance?
Ask when you book. Images of the findings can help explain the problem to a contractor or insurance adjuster.
How is infrared different from thermal imaging?
They are the same technology. See thermal imaging leak detection for how the images are read.
Request service
Leak hiding behind
a finished wall?
Tell us what you are seeing and where. HomePro will follow up to arrange an inspection and a free estimate.
- Phone(858) 251-7070
- Emailinfo@homeproplumbingsd.com
- Shop8910 Activity Rd Suite C
San Diego, CA 92126 - Backed byFree estimates · One-year warranty on our work · Financing options available
Prefer to write it down? Use the service request form at the top of this page.
